Inherited Settings. By default, all of the following settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options. For more information, see section Inheritance of Settings. Scanning Interval. Click to interrupt the inheritance. Select a scanning interval from the dropdown list.

The scanning interval determines the amount of time that the sensor waits between two scans. Choose from:. The minimum scanning interval of this sensor is 1 minute. The recommended scanning interval of this sensor is 5 minutes. If a Sensor Query Fails. Select the number of scanning intervals that the sensor has time to reach and to check a device again if a sensor query fails.

Depending on the option that you select, the sensor can try to reach and to check a device again several times before the sensor shows the Down status. This can avoid false alarms if the monitored device only has temporary issues. For previous scanning intervals with failed requests, the sensor shows the Warning status.

Sensors that monitor via Windows Management Instrumentation WMI always wait at least one scanning interval before they show the Down status. It is not possible to immediately set a WMI sensor to the Down status, so the first option does not apply to these sensors. All other options can apply. If you define error limits for a sensor’s channels, the sensor immediately shows the Down status. None of the interval options apply. If a channel uses lookup values, the sensor immediately shows the Down status.

Schedules, Dependencies, and Maintenance Window. You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects’ settings. Select a schedule from the list. You can use schedules to monitor during a certain time span days or hours every week. You can create schedules, edit schedules, or pause monitoring for a specific time span.

For more information, see section Schedules. Maintenance Window. Select if you want to set up a one-time maintenance window. During a maintenance window, monitoring stops for the selected object and all child objects.

They show the Paused status instead. Choose between:. To terminate an active maintenance window before the defined end date, change the time entry in Maintenance Ends to a date in the past. Maintenance Begins. This setting is only visible if you enable Set up a one-time maintenance window above. Use the date time picker to enter the start date and time of the one-time maintenance window. Maintenance Ends. Use the date time picker to enter the end date and time of the one-time maintenance window.

Dependency Type. Select a dependency type. You can use dependencies to pause monitoring for an object depending on the status of a different object. You can choose from:. To test your dependencies , select Simulate Error Status from the context menu of an object that other objects depend on.

A few seconds later, all dependent objects are paused. You can check all dependencies under Devices Dependencies in the main menu bar. This setting is only visible if you enable Select a sensor above.

Click and use the object selector to select a sensor on which the current object will depend. Dependency Delay Sec. This setting is only visible if you select Select a sensor above.

Define a time span in seconds for the dependency delay. After the master sensor for this dependency returns to the Up status, PRTG additionally delays the monitoring of the dependent objects by the time span you define.

This can prevent false alarms, for example, after a server restart or to give systems more time for all services to start. Enter an integer value. This setting is not available if you set this sensor to Use parent or to be the Master sensor for parent. In this case, define delays in the parent device settings or in its parent group settings.

Access Rights. User Group Access. Define the user groups that have access to the sensor. You see a table with user groups and group access rights. The table contains all user groups in your setup.

For each user group, you can choose from the following group access rights:. For more details on access rights, see section Access Rights Management. Channel Unit Configuration. Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels. Channel Unit Types. For each type of channel, select the unit in which PRTG displays the data.

If you define this setting on probe, group, or device level, you can inherit these settings to all sensors underneath. You can set units for the following channel types if available :. Custom channel types are only available on sensor level. Channel List. Which channels the sensor actually shows might depend on the monitored device, the available components, and the sensor setup.

Cloud Recording. The status of Cloud Recording. Downloading Center. The status of Downloading Center. In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.

Live Streaming. The status of Live Streaming. The status of Marketplace. Meeting Telephony Services. The status of Meeting Telephony Services. Web Client. The status of Web Client. Web Portal. The status of Web Portal. Web SDK. The status of Web SDK. The status of Webhooks. Zoom Chat. The status of Zoom Chat.

Zoom Cloud Room Connector. The status of Zoom Cloud Room Connector. Zoom Connector for Cisco. The status of Zoom Connector for Cisco. Zoom Connector for Polycom. The status of Zoom Connector for Polycom. Zoom Meetings. The status of Zoom Meetings.

While using Zoom with an Apple external keyboard, the Zoom region follows the insertion point, keeping it in the center of the display.

See Apple external keyboards for iPad. To turn off Zoom, double-tap the screen with three fingers or use accessibility shortcuts. Adjust any of the following: Follow Focus: Track your selections, the text insertion point, and your typing. Smart Typing: Switch to Window Zoom when a keyboard appears. Keyboard Shortcuts: Control Zoom using shortcuts on an external keyboard. Maximum Zoom Level: Drag the slider to adjust the level. If you use iPad with a pointer device, you can also set the following below Pointer Control: Zoom Pan: Choose Continuous, Centered, or Edges to set how the screen image moves with the pointer.

Adjust Size with Zoom: Allow the pointer to scale with zoom. Use Zoom Double-tap the screen with three fingers or use accessibility shortcuts to turn on Zoom. To see more of the screen, do any of the following: Adjust the magnification: Double-tap the screen with three fingers without lifting your fingers after the second tap , then drag up or down.

Pan to another area: Full Screen Zoom Drag the screen with three fingers.

 
 

Increase security and privacy for Zoom meetings – IT Help.

 

The Zoom Service Status sensor monitors the global status of all Zoom services. For a detailed list and descriptions of the channels that this sensor can show, see section Channel List. Sensor in Other Languages. Add Sensor. The Add Sensor dialog appears when you manually add a new sensor to a device.

It only shows the settings that are required to create the sensor. You can change nearly all settings wtatus the sensor’s Settings tab after creation. Basic Sensor Settings. Click the Settings tab of a sensor to change its settings. Sensor Name. Enter a name to identify the sensor. Parent Tags. Shows tags that the sensor inherits from its parent devicezoom status settings – none: sfttingsand parent zoom download apk. This setting is for your information only.

You cannot change it. Enter one sttings more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

For performance staatus, it can take some minutes until you can zoom status settings – none: for new tags that you added. The sensor has the following default tags that are automatically predefined in the sensor’s settings when you add the sensor:. Select a priority for the sensor. This setting determines the stxtus of the sensor in lists.

The highest priority is at the top of a list. Non:e from zoom status settings – none: lowest priority to the highest priority. Sensor Display. Primary Channel. Select a channel from the list to define it as the primary channel.

In the device tree, the last value of the primary channel is always displayed below the sensor’s name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel комменты how to join zoom meet – how to join zoom meet: большое on the sensor’s Overview tab. Graph Type. Define how different channels are shown for this sensor:.

Stack Unit. This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list.

All channels with this unit are stacked on top of each other. By default, you читать полностью zoom status settings – none: single channels from stacking if they use the zoom not working in 365 unit. However, there is an advanced procedure to noje: so. Debug Options. Result Handling.

Zoom status settings – none: what PRTG does with the sensor result:. Inherited Settings. By default, all of the following settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if zoom status settings – none:.

To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options. For more information, see section Inheritance of Settings.

Scanning Interval. Click to interrupt the inheritance. Select zoom status settings – none: scanning interval from the dropdown list. The scanning interval determines the amount of time that the sensor waits between two scans.

Choose from:. The minimum scanning interval of this sensor is 1 minute. The recommended scanning interval of this zoom status settings – none: is 5 minutes. If a Sensor Query Fails. Zoom status settings – none: the setitngs of scanning intervals that the sensor has time to reach and to check zoom status settings – none: device again if a sensor query fails. Depending on the option that you select, the sensor can try to reach and to check a device again по этому сообщению times before the sensor shows the Down status.

This can avoid false alarms if the monitored device only has temporary issues. For previous scanning intervals with failed requests, the sensor shows the Warning status. Sensors that monitor via Windows Management Instrumentation WMI always wait at least one scanning interval before they show the Down status.

It is not possible to immediately set a WMI sensor to the Down status, so the first option does not apply to these sensors. All other zoim can apply. If you define error limits for a sensor’s channels, the sensor immediately shows the Down status.

None of the interval settinga apply. If a channel uses lookup values, the sensor immediately shows the Down status. Schedules, Dependencies, and Maintenance Window. You settingx interrupt statu inheritance for schedules, dependencies, and maintenance windows.

The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, swttings maintenance windows.

They are active at the same time as the parent objects’ settings. Select to zoom a pc screen – how to zoom on a pc screen: schedule from the list. You can use schedules to monitor during a certain time span days or hours every week. You can create schedules, edit schedules, or pause monitoring for a specific time span. For more information, see section Schedules. Maintenance Window. Select if you zoom status settings – none: to set up a one-time maintenance window.

During a maintenance window, monitoring stops for the nome: object and all child objects. They show the Paused status instead. Choose between:. To terminate an active sttus window statis the defined end date, change the time entry in Maintenance Ends to a date in the past. Maintenance Begins. This setting is only visible if you enable Set up a one-time maintenance window above. Use the date time picker to enter the start date and time of the one-time maintenance window.

Maintenance Ends. Nond: the date time picker to enter the end date and time of the one-time maintenance window. Dependency Type. Select a dependency type. You can use dependencies to pause monitoring for an object depending on the status of setttings different object. You can choose from:. To test your dependenciesselect Simulate Error Status from the context menu of an object that other objects depend on. A few statis later, all dependent objects are paused.

You zoom status settings – none: check all dependencies under Devices Dependencies in the main menu bar. This setting is only visible if you zoim Select a sensor above. Click and use the object selector to select a sensor on which setings current object will depend.

Dependency Delay Sec. This setting is only visible if you select Select a sensor above. Define a time span in seconds for the dependency delay.

After the master sensor for this dependency returns to the Up status, PRTG additionally delays the monitoring of the dependent objects by the time span you define.

 

Zoom status settings – none:. You need to have JavaScript enabled in order to access this site.

 
Dependency This setting is only visible if you enable Select a sensor above. If a Sensor Query Fails Select the number of scanning intervals that the sensor has time to reach and to check a device again if a sensor query fails. Click the Settings tab of a sensor to change its settings. The Division of Information Technology provides support on all of our services.